• Superior exhaust flow rates (Example: A 4' hood can perform at 500 CFM)
• ETL Listed for use over 450°F and 700°F cooking surface temperatures. ETL Listed to Canadian safety standards, NSF Listed and built in accordance with NFPA 96.
• Up to 90% make-up air supplied through optional rear plenum.
• Separate flue gas chamber not required. Design inhibits discoloration of hood.
• Sturdy stainless steel construction with double wall, insulated front panel.
• Unique front design prohibits condensation and directs grease laden vapors toward the exhaust filter bank. Stainless steel is finished on both interior and exterior sides of the front to enhance aesthetics.
• All hoods come standard with aluminum baffle filters. Captrate Combo®, Captrate Solo®, high efficiency stainless steel baffle, and stainless steel baffle filters are optional. High velocity cartridge filters are available on the ECLPX series.
• Factory pre-wired lighting to illuminate cooking surface.
• Space saving, compact design uses limited kitchen space (28" minimum width).
• Integral stainless steel double end panels provided to maximize hood performance and eliminate effects of kitchen cross drafts.
• Optional UL Listed light and fan control switches pre-wired and flush mounted through built-in electrical chaseway.
• Optional integral air space provided to meet NFPA 96 clearance requirements against limited combustible wall. Optional insulated 3" air space available for combustible wall.
• Optional ETL Listed exhaust fire damper (Model ELPX-D)

Model	Type	Avg. Cooking Surface Temperature (°F)--Cooking Surfaces	Exhaust CFM/ft.	Supply CFM/Ft.--via Optional Perforated Supply Plenum
ELPX	standard baffle filter	450°F - Ovens, Steamers, Kettle, Open-Burner Ranges, Griddles, Fryers	150	135 (90%)
ELPX-D	standard baffle filter	450°F - Ovens, Steamers, Kettle, Open-Burner Ranges, Griddles, Fryers	150	135 (90%)
ECLPX	high velocity cartridge filter	450°F - Ovens, Steamers, Kettle, Open-Burner Ranges, Griddles, Fryers	125	112 (90%)
ECLPX-D	high velocity cartridge filter	450°F - Ovens, Steamers, Kettle, Open-Burner Ranges, Griddles, Fryers	125	112 (90%)
ELPX	standard baffle filter	700°F - Gas Charbroilers, Electric Charbroilers, Mesquite Grills, Charcoal Charbroilers, Gas Conveyor Charbroilers, Wood Burning Appliances	200	160 (80%)
ELPX-D	standard baffle filter	700°F - Gas Charbroilers, Electric Charbroilers, Mesquite Grills, Charcoal Charbroilers, Gas Conveyor Charbroilers, Wood Burning Appliances	200	160 (80%)
ECLPX	high velocity cartridge filter	700°F - Gas Charbroilers, Electric Charbroilers, Mesquite Grills, Charcoal Charbroilers, Gas Conveyor Charbroilers, Wood Burning Appliances	180	144 (80%)
ECLPX-D	high velocity cartridge filter	700°F - Gas Charbroilers, Electric Charbroilers, Mesquite Grills, Charcoal Charbroilers, Gas Conveyor Charbroilers, Wood Burning Appliances	180	144 (80%)

Recommended Duct Sizing:

• Exhaust: Based on 1600 FPM
• Supply: Based on 800 to 1200 FPM

• Fabricated of Type 430 stainless steel, #3 or #4 polish, on all exposed surfaces. Optional type 304 stainless steel available.
• Double-wall, insulated front increases rigidity and reduces condensation.
• Fitted with 12" high, UL Classified, baffle-type aluminum filters, removable for cleaning. Optional stainless steel or high velocity cartridge filters available (Model ECLPX).
• A sloped grease trough with removable, 1/2 pint cup to drain grease.
• Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
• Supplied with stainless steel, integral double end panels to maximize hood performance and eliminate effects of kitchen cross drafts. Panels are sloped from lower front edge to bottom back for 450°F cooking surfaces; full ends for 700°F cooking surfaces.
• Fitted with UL Listed, pre-wired, incandescent light fixtures and tempered glass globes to hold up to a standard 100 watt bulb. Recessed fluorescent lights optional. (subject to dimensional and other restrictions.)
• Designed to inhibit discoloration of hood typically caused by cooking equipment flue gases without the use of a separate flue gas chamber.
• Front design prohibits condensation and directs grease-laden vapors toward the exhaust filter bank. Polished stainless steel on the interior and exterior of the front enhance aesthetics.
• A built-in wiring chase provided for optimal positioning of electrical controls and outlets on front face of hood without penetrating capture area or requiring sleeve.
• Optional integral air space provided to meet NFPA 96 clearance requirements against limited combustible wall; optional, insulated NFPA 96 approved air space available for combustible wall.
• Optional ETL Listed exhaust fire damper (Model ELPX-D).
• Model ELPX is ETL Listed for 450°F and 700°F cooking surfaces (File 3054804-001 without exhaust damper; File 3054804-002 with exhaust damper), NSF Listed and built in accordance with NFPA Standard 96.

UTILITY CABINET: ETL Listed for integral side mount on the econair, inc. ventilation hood...fabricated of same material as hood...the cabinet houses factory pre-piped UL Listed fire suppression system* and ETL Listed, pre-wired electrical controls...pre-wire package* contains light switches, lighted fan control switches and internal factory wiring and components (starters, relays, etc.) to reduce field wiring requirements. ETL tests confirm temperatures do not exceed 120°F inside the cabinet during fire condition. (120°F is the maximum allowed storage temperature for the UL Listed fire suppression system and the ETL Listed Industrial control panel.
(*Dimensional restrictions may apply)

BACK SUPPLY PLENUM: Provides make-up air for the kitchen, discharged below cooking equipment...welded...stainless steel exposed surfaces...unexposed surfaces made of aluminized metal...shipped separately, requiring field connection...insulated to prevent condensation...perforated diffuser plates for even air distribution. Provides required clearance from limited combustibles per NFPA 96 Standards.

REMOVABLE ETL LISTED HIGH-VELOCITY CARTRIDGE FILTER: Constructed of stainless steel...uses centrifugal force to remove grease and other particulates...National Institute of Standards and Technology methodology used by an independent agency to evaluate performance...tests indicated 95 percent extraction efficiency.

ENCLOSURE PANELS: Constructed of stainless steel...mounting channel factory-welded to hood for field installation of panels over 11" high...under 11", factory-welded and integrally installed into hood front and ends...sized to extend from hood top to ceiling, enclosing pipe and hanging parts.

EXHAUST FIRE DAMPER: ETL Listed...installed in exhaust collar...activated by a UL Listed, 286°F, 40 lb. rated fusible link.

ROOF TOP PACKAGE: Combination ETL Listed exhaust/supply air unit with factory prewired and mounted motors, trunkline and curb vented on exhaust side. Various models perform up to 14,000 CFM exhaust and up to 3 inches static pressure...weatherproofed...galvanized construction... washable mesh filters...exhaust/supply air fans share common roof penetration...internal wiring drops directly through curb, requiring no pitch pockets...exhaust outlets/air intakes spaced to conform to code regulations...automatic reset/thermal overload protection on all single phase motors and on three phase motors if pre-wire assembly is included in package...standard single-point power connections...UL 705, 762 Listed exhaust fans rated for high grease applications...optional backdraft dampers.

SEPARATE FANS: ETL Listed single exhaust fans and supply-air fans and curbs available...same features, construction methods and performance ratings as roof top package above.

HEATED MAKE-UP AIR: ETL Listed direct fired gas heated make-up air unit manufactured by econair, inc....ETL Listed for natural gas and propane...design integrates the blower and burner into a single package...heavy duty, weather resistant, galvanized steel construction...units available in Roof Top Package or as a stand alone heated make-up air module...several models available to meet almost any performance rating specification.

Econair, inc. sells this hood as a stand-alone appliance to be integrated into a kitchen ventilation application. Econair, inc. also provides this hood as part of a FULLY INTEGRATED PACKAGE designed by econair, inc. and pre-engineered for OPTIMUM PERFORMANCE. The package consists of the hood, an integral ETL Listed utility cabinet, factory pre-wired ETL Listed electrical controls, and a factory pre-piped UL Listed fire suppression system. Other options include a ETL Listed exhaust damper, a ETL Listed exhaust fan, a ETL Listed non-tempered make-up air fan, and/or a ETL Listed direct-fired heated make-up air unit. Fire suppression systems include final hookup and inspection.