|
Heat / Condensate hood is a single, double walled vent hood used for non-grease applications used for
the removal of heat, vapor etc. Hood shall have the size, shape and performance specified on the drawings.
Construction shall be type 304 stainless steel on hoods with gutters and 430 stainless steel on hoods without
gutters, finish shall be #3 or #4 polish where exposed. Hood shall be wall or island type with fully welded 10
gauge corner hanging angles. Corner hanging angles have a .625 x 1.500 slot pre-punched at the factory, this allows
hanging rods to be used for quick and safe installations. Hanging rod and connection is provided by and installed by others.
The hood manufacture shall supply complete submittal drawings including hood section views(s) and hood plan view(s). These
drawings must be made available to the engineer, architect and owner for their use in construction, operation and maintenance.
Exhaust duct collar to be 4" high with 1" flanges. Duct sizes, CFM and static pressure requirements shall be as
shown on the drawings. Hood shall be recognized by NSF.
|
